| |
|
FuturEnergy Turbines
FuturEnergy Upwind Turbine [ 1kw ]
Permenant Magnet Generator
Spare Blades
These turbines are not available to purchase online as installed cost can vary considerably. Price shown is a guide price for the turbine unit only and does not include cabling, inverters, controllers, mast etc. If you are interested in purchasing a turbine, or just want more info, feel free to call us on +44 (0)1502 515 532 or email us: info [at] solarenergyalliance [dot] com
-------------------------------------------------------------------------------------------------------------------------------------------
|
FuturEnergy Upwind Turbine 1kw
New ‘rugged’ Upwind Turbine range is based on 2 years of real-life testing and development in Warwickshire and the Uplands of Scotland.
Using unique Permanent Magnet Generators, combined with our Hi-Spec Wind Turbine Blade Sets, these furling turbines create very useful power in low wind conditions, and over 1000W in winds of 12.5m/s.
Available in 12V, 24V, 36V & 48V DC versions, they are suitable for battery charging, water/air heating and Grid-Tie installations.
Components / Spares available below.
Price: £591.49 (ex VAT) £695 (inc VAT)
 Download Info PDF
12v 24v 36v 48v
Tower & Site Guide (.doc)
^ top ^ |
------------------------------------------------------------------------------------------------------------------------------------------
|
Permanent Magnet Generator
At the heart of our 1KW Turbines is this Permanent Magnet Generator. Using the very latest in rare earth magnets to produce very high power outputs at low RPM levels, while achieving this from a PMG weighing only 7Kg. With a wide variety of uses, from wind and water turbines, to fuel-powered generators.
Supplied with 3-Phase power output cables (approx 15cm in length), 18mm axle securing nut and washer, and 5 x 8mm nuts, washers and split rings on the faceplate mounting bolts. You will need to rectify the output of the 3-phases to produce DC for battery charging and other applications.
Price: £127.66 (ex VAT) £150 (inc VAT)
 Download Info PDF
^ top ^
|
------------------------------------------------------------------------------------------------------------------------------------------
|
These wind turbine blade sets are constructed to the highest of standards, and are used at the heart of our 1KW downwind range.
They can easily be adapted to suit other turbines, and will produce up to 1.2kW of power in 12.5m/s winds.
The blade set comes in kit form, including 5 x high-spec blades, manufactured in black PAG material (virtually indestructible, and don't require painting), with 2 x 5-blade hubs (black anodised finish) and location pitch pins (25 degree root angle).
Once assembled, the complete rotor, measuring 1800mm in diameter, can be adapted to suit many power generators, and will perform best in the 300 to 900 RPM range.
The hub is supplied with enough nuts & bolts to assemble the complete rotor, and has 5 mounting holes, each of 6mm in diameter, positioned in a pentagon shape at a PCD of 90mm.
The main boss hole in the hub has a diameter of 74.6mm, and care should be taken to accurately, securely and centrally mount the completed rotor on to your intended application.
Price: £144.68 (ex VAT) £170 (inc VAT)
^ top ^ |
------------------------------------------------------------------------------------------------------------------------------------------
|
|
